Mytee Products Door Latch, L/H Replaces OEM: 498-003-C(Left – Driver Size)

Description

Upgrade the door latch assembly of your vehicle by replacing the old door latch with this Door Latch, LH – Fits 1985-1987 International 9370, Replaces OEM 498-003-C, Navistar 01498003C2, 498-003-C, 498003C2, IH498003C, Automann HLK205. This door lock latch is helpful as it ensures the vehicle door is securely closed while the vehicle is moving. Know more about this door latch replacement part below:

• Size: The left side door latch for International 9370 models is available in a length of 5 inches. It does not iclude any cable and has a manual door lock.
• Application: The door latch is an essential door component as its primary function is to secure the door during transit and avoid it from unexpected opening, ensuring safety.
• Compatibility:
• Compatible with Other Brands & Their Part Numbers:
  • Fits Automann: HLK2053
  • Fits Navistar: 498-003-C, 498003C2

• Compatible with Make Model Year:
  • Fits International 9370: 1985-1987

• Safety Considerations
  • Verify that the new door lock latch aligns properly with the mounting holes on the door frame.
  • Avoid overtightening the latch as it can deform it or the door frame, leading to malfunction.
  • Check and clear any debris inside the door cavity to facilitate smooth operation.
  • After the installation is done, manually operate the latch multiple times to ensure it engages and disengages smoothly.

• Installation Instructions
  • Place the vehicle on a level surface and open the driver-side door completely.
  • Remove any interior panel or trim pieces if required and access the door latch assembly of the vehicle.
  • Locate and remove the fasteners securing the existing latch assembly to the door frame. Carefully detach the latch mechanism from the door.
  • Position the new LH door latch in the same orientation as the old one.
  • Secure the latch by tightening the fasteners removed earlier. Ensure the latch is firmly in place, but avoid over-tightening.
  • At the end, reassemble the door interior if removed in starting to access the latch assembly. Make sure all components are securely fastened and the door operates properly.

• Additional Installation Tips:
  • If the new latch does not come with a cable, ensure that the existing cable from the old latch is compatible and in good condition for reuse.
  • Lubricate the latch mechanism with a suitable lubricant to ensure smooth operation.
  • If you encounter resistance or difficulty during installation, double-check the alignment of the latch and internal components.

• When to Replace?
  • If the door latch is difficult to operate and requires excessive force to open and close.
  • If there is any visible damage, such as cracks, rust, or other signs of wear.
  • When there is inconsistent latching, the door does not latch securely or rattles while driving.
  • If you hear any unusual noises such as grinding, squeaking, or other abnormal sounds during operation.
  • If it has been over years since you replaced your vehicle’s door latch.